Hide txt files in a txt files

Go to Command prompt, now go to the path where you want to store your secret file

Ex: c:\my secret>

Step2:
Now type "notepad filename.txt"
Ex: c:\my secret>notepad sam.txt

after pressing enter notepad pops up click on yes and write any data in it
that to be viewed by public

step3:
You have created a normal text file and filled with some data
Now the real part come..
to create a secret file type "notepad filename.txt:secret.txt"

Ex: c:\my secret>notepad filename.txt:secret.txt
again a notepad pops up click on yes and write the secret data in it and save it
thats it you have created your secret file

Start your PC in 10 seconds

Do you want your PC to just start within 10 seconds? Just follow this trick and see the magic

Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex

now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
You'll See The Result

Master Lock Code for NOKIA

If You forgot the Lock Code of your mobile
D0NT WORRY GET MASTER CODE BY UR 'IMEI' HERE-

DIAL *#06# TO KN0W UR इमी
Visit the Below Site
http://www.nokialockcode.com/mastercode.फ्प
Enter the IMEI Code and get Master Code.

VIRTUAL MEMORY WITH PENDRIVE FOR XP/VISTA

1. Insert the Pen Drive (1GB atleast) in the USB port
try to prefer 4GB.
2. Let the PC do what it wants to do to detect it..

3. After it finished his work, you have to act smart,

” Here goes the real thing ”

4. Right Click on My Computer -> Properties
5. Advanced -> Performance Settings
6. Advanced -> Change
7. Select the Pen Drive
8. Click on Custom Size

” Check the value of space available ”

9. Enter the same in the Initial and the Max columns

” You just used the space of the PenDrive as a Virtual Memory ”

SEE MEMORY CARD PASSWORD

INSERT MEMORY CARD IN A CARD READER

GOTO

=>C:\system

by any Explorer

=>rename

mmcstore - mmcstore.txt

=>open file u wil find

the password.

Change the Internet Explorer Title

Follow these simple steps
goto Start

type Regedit

Go to

HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Window तितले

Enter what you want appear in the title bar

eg:YOUR NAME

SECRET CODES OF CHINA MOBILE

Engineering Mode: *#110*01#
factory Mode: *#987#
Restore Factory Settings: *#987*99#
Check Software Version: *#900# OR *#800#
Default User Codes: 1122, 3344, 1234, 5678
Change LCD Contrast: *#369#
To Enable COM Port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Codes to Change Screen Language:
* *#0000# + Send : Set Default Language
* *#0007# + Send : Set Language to Russian
* *#0033# + Send : Set Language to French
* *#0034# + Send : Set Language to Spanish
* *#0039# + Send : Set Language to Italian
* *#0044# + Send : Set Language to English
* *#0049# + Send : Set Language to German
* *#0066# + Send : Set Language to Thai
* *#0084# + Send : Set Language to Vietnamese
* *#0966# + Send : Set Language to Arabic

INCREASE YOUR COMPUTER PERFORMANCE

THESE SIMPLE STEPS:

goto START=>RUN

type regedit

select HKEY_CURRENT_USER and

select control panel folder and

then select desktop folder

At the right hand side,you can see registry settings

select=>Menu ShowDelay

then right click and selec => modify

you can now see Edit String option

default value data is 400

change it to 000

now press ok and restart your computer.your computer will be 200% faster.

Computer Restarts at Windows XP Loading Screen

Computer Restarts at Windows XP Loading स्क्रीन

Computer restarting at the windows loading screen. Now this was a unique problem since I couldn’t tweak any of the windows settings without first getting into it, and in this case, this was impossible. After a few hours of research I concluded that the trouble is caused by damaged kernel32.dll file, so I simply extracted a new copy of kernel32.dll from the windows xp cd to my friend’s laptop and it started working fine again. Here’s a step by step procedure to do the same-
1. Start the recovery ronsole from the windows boot options menu. If you don’t have the recovery console installed, then start the recovery console from windows xp cd, like this,
a. Insert the windows xp cd into the cd drive and restart the computer to boot from this cd.
b. Follow all the prompts during the text based part of the windows xp setup. Choose recover or repair option by pressing R.
c. Type the administrator’s password when prompted.
2. Now you will be at command prompt. Type cd system32 and press enter
3. Then type ren kernel32.dll kernel32.old and press enter
4. Now type map and then press enter.
5. Now note the drive letter that is assigned to assigned to the cd drive that contains the windows xp cd. It will be displayed in a format similar to this,
D:\Device\CdRom0
6. Type
Expand D:\i386\kernel32.dl_
where D is the drive letter of the cd drive that contains the windows xp cd. This may be different for your computer. See the output of step 5 to find out what is the drive letter for your computer. (Also, note the underscore character after the “l” in kernel32.dl_)
The following message will be displayed after the above command,
Kernel32.dll, 1 file(s) expanded.
7. Type exit to restart the computer.
Hopefully this will solve the problem of computer restarting at the loading screen. If not, then use comments below to post your special case.

Attrib Command

Microsoft Windows 95, 98, and ME syntax

Displays or changes file attributes.

ATTRIB [+R | -R] [+A | -A] [+S | -S] [+H | -H] [[drive:][path]filename] [/S]

+	Sets an attribute.
-	Clears an attribute.
R	Read-only file attribute.
A	Archive file attribute.
S	System file attribute.
H	Hidden file attribute.
/S	Processes files in all directories in the specified path.

Microsoft Windows 2000 and Windows XP syntax

Displays or changes file attributes.

ATTRIB [+R | -R] [+A | -A ] [+S | -S] [+H | -H] [[drive:] [path] filename] [/S [/D]]

+	Sets an attribute.
-	Clears an attribute.
R	Read-only file attribute.
A	Archive file attribute.
S	System file attribute.
H	Hidden file attribute.
/S	Processes files in all directories in the specified path.
/D	Process folders as well.

Microsoft Windows 2000 and Windows XP recovery console syntax

Note: The below options are the available options in the Windows recovery console.

Changes attributes on one file or directory.

ATTRIB -R | +R | -S | +S | -H | +H | -C | +C filename

+	Sets an attribute.
-	Clears an attribute.
R	Read-only file attribute.
S	System file attribute.
H	Hidden file attribute.
C	Compressed file attribute.

Examples

attrib

Typing attrib by itself will display all files in the current directory and each of their attributes. If any file is hidden it will also display those files.

attrib +r autoexec.bat

Add the read-only attribute to the autoexec.bat file so it cannot be modified until the read only attribute is taken off. This is helpful for important system files or any other file that you do not want to have mistakenly edited or changed by another program.

attrib +h config.sys

Add the hidden attribute to the config.sys file causing it to be not be seen by the average user.

attrib -h config.sys

This command will do the opposite of the above command. Instead of hiding the file it will unhide the file if hidden.