Enable / Disable the Task Manager

Enable / Disable the Task Manager

1. Start Regedit
2. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\
3. Create the Dword value DisableTaskMgr
4. Give it a value of 0 to enable it
5. Give it a vaule of 1 to disable it

Disable Downloading from IE

At the top of your browser window, select "Tools"
Select "Internet Options" from the drop down window
Click on the "Security" tab
Select "Custom Level"
Scroll down to "Downloads" - "File Downloads"
Check the "Disable" circle
Click "OK" to close that window
Then click "OK" to close the other window

Receive Yahoo Mail from Outlook Express

From the Tools menu, choose "Accounts."
Select the "Mail" tab.
Click the "Add" button.
From the Add menu, click "Mail."
In the text box labeled Display Name, type your name and click "Next."
In the Email Address box, type your Yahoo! Mail address (be sure to include "@yahoo.com") and click "Next."
Under "My incoming mail server is a..." select "POP3."
Type "pop.mail.yahoo.com" in the Incoming Mail (POP3, IMAP, or HTTP) Server box.
Type "smtp.mail.yahoo.com" in the Outgoing Mail (SMTP) Server box.
Click "Next."
In the Account Name box, type your Yahoo! Mail ID (your email address without the "@yahoo.com").
In the Password box, type your Yahoo! Mail password.
If you want Outlook Express to remember your password, check the "Remember password" box.
Do not check the boxes labeled "Log on using Secure..."
Click "Next."
Click "Finish."

Then:
From the Tools menu, choose "Accounts."
Select the "Mail" tab.
Double-click the account labeled "pop.mail.yahoo.com."
Select the "Servers" tab.
Check the box next to "My Server Requires Authentication."
Click "OK."

To control deletion of messages from the Yahoo! Mail Server:
From the Tools menu, choose "Accounts."
Select the "Mail" tab.
Double-click the account labeled "pop.mail.yahoo.com."
Select the "Advanced" tab.
In the Delivery section at the bottom of the window, check "Leave a copy of messages on server" if you want to save your Yahoo! Mail messages on the Yahoo! Mail server as well as on your local computer. Do not check this box if you want your messages to be deleted from the Yahoo! Mail server once you have received them in Outlook Express.
If your ISP blocks port 25 or if you're unable to send email, then you will need to use port 587 when sending via Yahoo!'s SMTP server. To make this change, please follow the directions below:
From the "Tools" menu, select "Accounts"
Select your Yahoo! POP account and click on the "Properties" button
Click on the "Advanced" tab
Next to "Outgoing server (SMTP), change port 25 to 587
Click "Apply", then click "OK" and "Close"

System shutting down when entering command prompt

Removal Instructions:

1. upon start up.... after os loading... go to task manager by pressing CTRL+ALT+DEL then kill password_viewer.exe or bar311.exe or photos.zip.exe...

2. EDIT the following registry entries thru regedit at start/run

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"Userinit"="userinit.exe,bar311.exe" ---> remove ", bar311.exe" only... leave userinit.exe because this is used by Windows when you log-in...

[HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\Explorer\Advanced]
"Hidden"=dword:00000001
"HideFileExt"=dword:00000000
"ShowSuperHidden"=dword:00000001

[HKEY_CURRENT_USER\Software\Microsoft\Command Processor]
"autorun"="c:\Windows\pc-off.bat" --> remove "c:\Windows\pc-off.bat" or delete the autorun key.


3. go to your thumb drive, please use the folders view in the explorer and use the navigation panel on the left side when accessing the drives to avoid triggering the autorun... then delete autorun.inf and password_viewer.exe or bar311.exe


4. open notepad then type what is shown below as is...

@echo off
del /a /f c:\Windows\bar311.exe
del /a /f c:\Windows\password_viewer.exe
del /a /f c:\Windows\photos.zip.exe
del /a /f c:\Windows\pc-off.bat
pause

then save this as remove.bat then click to run.... this will remove the virus...

SET Computer Date/Time on LAN

You Can change any computer’s date and time on LAN.


First Go to Command prompt
Type
Net Time \\Computer name or IP Address /SET
Net Time \\192.168.0.100 /SET



Click Y If you want to change Date and Time according to your computers date and time.

Enable Disabled Registory

Registry editing has been disabled by your administrator” - Error you get when you try to open the Registry Editor in Windows XP, Windows 2000, Windows Vista and prevents access to registry editing.

Restore TASK Manager, Regedit and Folder Option disabled by virus. Download Remove Restriction Tool (RRT)from below link
DOWNLOAD RRT TOOL

SpyHunter v3.4.9 Security Suite

Removes all unwanted spyware from your machineSpyHunter v.3 is the latest in spyware detection and removal. SpyHunter will hunt down and remove from your machine spyware/adware. SpyHunter utilizes proprietary developed techniques to remove difficult programs that other anti-spyware programs cannot.Our scanner has been timed and it is extremely fast and efficient.In addition to scanning and removing spyware and adware, SpyHunter also has the ability to rapidly generate support logs and interface directly with our customer support department for new spyware threats.

FEATURES:- Removes spyware, adware, keyloggers, cookies, spyware registry keys, toolbars, internal popup programs, memory resident spyware.- Removes spyware programs that may be slowing down your computer.- Database of 47,000 spyware and adware threats.- Free Updates when available for new spyware parasites .- Fastest Scanner on the marketplace (timed vs other products).- Rollback Capabilities, to undo the spyware you removed.- Easy to use interfaceOperating System Requirements:Windows 98, Me, 2000, XP or Vista.



HERE IS 2 DOWNLOAD LINK NO MIRROR

PLEASEDOWNLOAD FROM HERE

DOWNLOAD LINK : DOWNLOAD EASY-SHARE .COM

DOWNLOAD LINK : DOWNLOAD DEPOSITFILES .COM

Home Page:http://www.enigmasoftware.com/

Nokia Mobile

Nokia Codes Tips and Tricks

To check the IMEI (International Mobile Equipment Identity) Type-

*#06#

Information you get from the IMEI-

XXXXXX XX XXXXXX X

TAC FAC SNR SP

· TAC = Type approval code

· FAC = Final assembly code

· SNR = Serial number

· SP = Spare

To check the phones Software revision type-

*#0000#

Information you get from the Software revision-

V 05.31

18-02-99

NSE-3

· 1ST Line = Software revision

· 2ND Line = The date of the software release

· 3RD Line = Phone type

To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

· Serial number (IMEI)

· Production date (MM/YY)

· Purchase date (MM/YY) You can only enter the date once.

· Date of last repair (0000=No repair)

· Transfer user data to another Nokia phone via Infra-Red

Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

THE REBOOT TRICK

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)

2. Make a note or reminder.

3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).

8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR CALL QUALITY

To activate EFR (Enhanced Full Rate) Enter the code-

*3370#

This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code-

#3370#

THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

NETWORK MONITOR

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.

2. Take apart the phone.

3. De-solder the EEPROM (ATMEL AT 24C64).

4. Read out the data with an EEPROM programmer and save it to a file (Backup).

5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".

6. If you have v5.24 then change the address "0378" from "00" to "FF".

7. Write the new data to the EEPROM and solder it back to the phone,

8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

· Carrier number

· MS RX Level in DBM

· Received signal quality

· MS TX power level

· C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.

· RTL (Radio link timeout).

· Timeslot

· Indication of the transmitter status

· Information on the Network parameters.

· TMSI (Temporary Mobile Subscriber Identity).

· Cell identification (Cell ID, Number of cells being used).

· MCC (Mobile country code)

· MCN (Mobile network code)

· LAC (Location area code)

· Ciphering (On/Off)

· Hopping (On/Off)

· DTX (On/Off)

· Discard cell barred information

CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.

· COUNTRY-LOCK

· NETWORK-LOCK

· PROVIDER-LOCK

· SIMCARD-LOCK

The code to read out the sim-lock status of your phone is

#PW+(MASTERCODE)+(Y)#

· # = DOUBLE-CROSS

· W = PRESS "*" THREE TIMES

· P = PRESS "*" FOUR TIMES

· + = PRESS "*" TWO TIMES

· MASTERCODE = 1234567890

· Y = NUMBER 1 TO 4

The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!

"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-LOCK CHECKS

· #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS

· #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS

· #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS

· #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.